Fig 1A
Fig 2A
Fig 4B
Fig 3D
Fig 3C
Fig 2B
Fig 2C
Fig 4A
Fig 3A
Fig 3B
Fig 1B
Fig 4C
Power Adapter Not Included
Location of SATA ports may vary
2. OPEN COMPUTER CASE
a) Remove the computer case cover carefully.
Follow the computer’s manual.
c) Remove the front panel of the computer and the panel covering
one empty 5.25” drive bay (if this applies to your computer).
b) Touch the metal casing of the computer to ground yourself and
remove static electricity.
3. INSTALL DVD RECORDER INTO YOUR COMPUTER
a) Slide the DVD Recorder into the empty drive bay.
b) Connect the SATA data cable and SATA power adapter to your
DVD Recorder.
c) Locate the SATA ports on your motherboard and connect the
other end of the SATA data cable.
d) Align the DVD Recorder in the bay, and using the included
screws, tighten the drive in place.
b) Replace and secure the computer outer case.
c) Reconnect the computer’s power plug to the wall outlet or surge
protector.
4. REPLACE COMPUTER CASE
a) Replace the front panel to the computer.
5 TURN ON YOUR COMPUTER
Push the computer power button on. Confi rm the new DVD Record-
er is recognized after the operating system boots up. For problems,
refer to the “Troubleshooting” section of this guide.
Tools Required
Internal DVD Recorder Installation
1) Phillips screwdriver ( not included )
2) I/O Magic DVD Recorder
3) SATA data cable
4) SATA power adapter ( not included )
5) This hardware guide
Burn Data CD or DVD
1. Click Nero StartSmart Essentials on your desktop.
2. From the left menu, select Data Burning.
3. Click “Add” and select the fi les you want to burn.
4. Click “Burn” and the disc tray of your DVD Recorder will eject
and prompt you to insert a blank disc.
5. Insert a blank disc into the DVD Recorder and close the tray.
6. Your disc will begin burning. Nero will indicate that the burn
was successful when fi nished.
Burn an Audio CD
1. Click Nero StartSmart Essentials on your desktop.
2. From the left menu, select Audio Burning.
3. Click “Audio CD” on the right.
4. Click “Add” and select the audio fi les you want to burn.
5. Click “Burn” and the disc tray of your DVD Recorder will eject
and prompt you to insert a blank disc.
6. Insert a blank disc into the DVD Recorder and close the tray.
7. Your disc will begin burning. Nero will indicate that the burn
was successful when fi nished.
Copying a CD or DVD
1. Click Nero StartSmart Essentials on your desktop.
2. From the left menu, select Copy Disc.
3. Insert your “source” CD or DVD into the DVD Recorder.
4. Click “Copy” to begin copying.
5. When prompted, insert your blank “target” CD or DVD into the
DVD Recorder.
6. When fi nished, you will see “Copy was successful.”
Installing Nero 9 Essentials
1. Insert the Nero 9 Essentials CD into your DVD Recorder.
2. The setup wizard should appear. If the setup wizard does not
appear, click on My Computer, and browse to your new DVD
Recorder containing your Nero CD. Double click “SetupX.exe” on
the CD to begin installation.
3. Select “Nero 9 Essentials” from the installation window.
4. Follow the on-screen instructions to complete installation.
Requirements: Windows 7 / Vista / XP
Nero Installation
Using Nero
If Nero 9 requests an installation serial number,
the serial number is located on your CD sleeve.
Nero 9 may take a few minutes to initialize.
Please be patient during the installation process.
b) Remove the computer’s power plug from the wall outlet or surge
protector.
1. START HERE
a) Turn off your computer.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals